With many businesses turning to Python’s powerful data science ecosystem to analyze their data, understanding how to avoid introducing bias into datasets is absolutely vital. If you’ve studied some statistics, then you’re probably familiar with terms like reporting bias, selection bias, and sampling bias. There’s another type of bias that plays an important role when you’re dealing with numeric data: rounding bias.
Understanding how rounding works in Python can help you avoid biasing your dataset. This is an important skill. After all, drawing conclusions from biased data can lead to costly mistakes.
In this tutorial, you’ll learn:
 Why the way you round numbers is important
 How to round a number according to various rounding strategies
 How to implement each strategy in pure Python
 How rounding affects data and which rounding strategy minimizes this effect
 How to round numbers in NumPy arrays and pandas DataFrames
 When to apply different rounding strategies
Take the Quiz: Test your knowledge with our interactive “Rounding Numbers in Python” quiz. Upon completion you will receive a score so you can track your learning progress over time:
Free Bonus: Click here to download sample code to ensure that your numbers are always well rounded!
You won’t get a treatise on numeric precision in computing, although you’ll touch briefly on the subject. Only a familiarity with the fundamentals of Python is necessary, and the math should feel familiar if you’ve had high school algebra.
You’ll start by looking at Python’s builtin rounding mechanism.
Python’s Builtin round()
Function
Python has a builtin round()
function that takes two numeric arguments, n
and ndigits
, and returns the number n
rounded to ndigits
. The ndigits
argument defaults to zero, so leaving it out results in a number rounded to an integer. As you’ll see, round()
may not work quite as you expect.
The way most people are taught to round a number goes something like this:

Round the number
n
top
decimal places by first shifting the decimal point inn
byp
places. To do that, multiplyn
by 10ᵖ (10 raised to thep
power) to get a new number,m
. 
Then look at the digit
d
in the first decimal place ofm
. Ifd
is less than 5, roundm
down to the nearest integer. Otherwise, roundm
up. 
Finally, shift the decimal point back
p
places by dividingm
by 10ᵖ.
It’s an algorithm! For example, the number 2.5
rounded to the nearest whole number is 3
. The number 1.64
rounded to one decimal place is 1.6
.
Now open up an interpreter session and round 2.5
to the nearest whole number using Python’s builtin round()
function:
>>> round(2.5)
2
Gasp!
Check out how round()
handles the number 1.5
:
>>> round(1.5)
2
So, round()
rounds 1.5
up to 2
, and 2.5
down to 2
!
Before you go raising an issue on the Python bug tracker, rest assured you that round(2.5)
is supposed to return 2
. There’s a good reason why round()
behaves the way it does.
In this tutorial, you’ll learn that there are more ways to round a number than you might expect, each with unique advantages and disadvantages. round()
behaves according to a particular rounding strategy—which may or may not be the one you need for a given situation.
You might be wondering, Can the way I round numbers really have that much of an impact? Next up, take a look at just how extreme the effects of rounding can be.
How Much Impact Can Rounding Have?
Suppose you have an incredibly lucky day and find $100 on the ground. Rather than spending all your money at once, you decide to play it smart and invest your money by buying some shares of different stocks.
The value of a stock depends on supply and demand. The more people there are who want to buy a stock, the more value that stock has, and vice versa. In highvolume stock markets, the value of a particular stock can fluctuate on a secondbysecond basis.
Now run a little experiment. Pretend the overall value of the stocks that you purchased fluctuates by some small random number each second, say between $0.05 and $0.05. This fluctuation may not necessarily be a nice value with only two decimal places. For example, the overall value may increase by $0.031286 one second and decrease the next second by $0.028476.
You don’t want to keep track of your value to the fifth or sixth decimal place, so you decide to chop everything off after the third decimal place. In rounding jargon, this is called truncating the number to the third decimal place. There’s some error to be expected here, but by keeping three decimal places, this error couldn’t be substantial. Right?
To run your experiment using Python, you start by writing a truncate()
function that truncates a number to three decimal places:
>>> def truncate(n):
... return int(n * 1000) / 1000
...
The truncate()
function first shifts the decimal point in the number n
three places to the right by multiplying n
by 1000
. You get the integer part of this new number with int()
. Finally, you shift the decimal point three places back to the left by dividing n
by 1000
.
Next, you define the initial parameters of the simulation. You’ll need two variables: one to keep track of the actual value of your stocks after the simulation is complete and one for the value of your stocks after you’ve been truncating to three decimal places at each step.
Start by initializing these variables to 100
:
>>> actual_value, truncated_value = 100, 100
Now run the simulation for 1,000,000 seconds (approximately 11.5 days). For each second, generate a random value between 0.05
and 0.05
with the uniform()
function in the random
module, and then update actual
and truncated
:
>>> import random
>>> random.seed(100)
>>> for _ in range(1_000_000):
... delta = random.uniform(0.05, 0.05)
... actual_value = actual_value + delta
... truncated_value = truncate(truncated_value + delta)
...
>>> actual_value
96.45273913513529
>>> truncated_value
0.239
The meat of the simulation takes place in the for
loop, which loops over the range of numbers between 0 and 999,999. The value taken from range()
at each step is stored in the variable _
, which you use here because you don’t actually need this value inside of the loop.
At each step of the loop, random.uniform()
generates a new random number between 0.05
and 0.05
, which you assign to the variable delta
. You calculate the new value of your investment by adding delta
to actual_value
, and then you calculate the truncated total by adding delta
to truncated_value
and then truncating this value with truncate()
.
As you can see by inspecting the actual_value
variable after running the loop, you only lost about $3.55. However, if you’d been looking at truncated_value
, you’d have thought that you’d lost almost all of your money!
Note: In the above example, you use the random.seed()
function to seed the pseudorandom number generator so that you can reproduce the output shown here.
To learn more about randomness in Python, check out Generating Random Data in Python (Guide) and Using the NumPy Random Number Generator.
Ignoring for the moment that round()
doesn’t behave quite as you expect, go ahead and try rerunning the simulation. You’ll use round()
this time to round to three decimal places at each step, and you’ll seed the simulation again to get the same results as before:
>>> random.seed(100)
>>> actual_value, rounded_value = 100, 100
>>> for _ in range(1_000_000):
... delta = random.uniform(0.05, 0.05)
... actual_value = actual_value + delta
... rounded_value = round(rounded_value + delta, 3)
...
>>> actual_value
96.45273913513529
>>> rounded_value
96.258
What a difference!
Shocking as it may seem, this exact error caused quite a stir in the early 1980s when the system designed for recording the value of the Vancouver Stock Exchange truncated the overall index value to three decimal places instead of rounding. Rounding errors have swayed elections and even resulted in the loss of life.
How you round numbers is important, and as a responsible developer and software designer, you need to know what the common issues are and how to deal with them. So it’s time to dive in and investigate what the different rounding methods are and how you can implement each one in pure Python.
Basic but Biased Rounding Strategies
There’s a plethora of rounding strategies, each with advantages and disadvantages. In this section, you’ll learn about some of the simplest techniques and see how they can influence your data. Later, you’ll learn about better methods.
Truncating
The simplest, albeit crudest, method for rounding a number is to truncate the number to a given number of digits. When you truncate a number, you replace each digit after a given position with 0. Here are some examples:
Value  Truncated To  Result 

12.345  Tens place  10 
12.345  Ones place  12 
12.345  Tenths place  12.3 
12.345  Hundredths place  12.34 
You’ve already seen one way to implement this in the truncate()
function from the How Much Impact Can Rounding Have? section. In that function, the input number was truncated to three decimal places by:
 Multiplying the number by
1000
to shift the decimal point three places to the right  Taking the integer part of that new number with
int()
 Shifting the decimal place three places back to the left by dividing by
1000
You can generalize this process by replacing 1000
with the number 10ᵖ. That’s 10
raised to the p power, where p is the number of decimal places to truncate to:
# rounding.py
def truncate(n, decimals=0):
multiplier = 10**decimals
return int(n * multiplier) / multiplier
In this version of truncate()
, the second argument defaults to 0
so that if you don’t pass a second argument to the function, then truncate()
returns the integer part of whatever number you passed to it.
The truncate()
function works well for both positive and negative numbers:
>>> from rounding import truncate
>>> truncate(12.5)
12.0
>>> truncate(5.963, 1)
5.9
>>> truncate(1.625, 2)
1.62
You can even pass a negative number to decimals
to truncate digits to the left of the decimal point:
>>> truncate(125.6, 1)
120.0
>>> truncate(1374.25, 3)
1000.0
When you truncate a positive number, you’re rounding it down. Likewise, truncating a negative number rounds that number up. In a sense, truncation is a combination of rounding methods depending on the sign of the number that you’re rounding.
Next up, you’ll take a look at each of these rounding methods individually, starting with rounding up.
Rounding Up
The second rounding strategy that you’ll look at is called rounding up. This strategy always rounds a number up to a specified number of digits. The following table summarizes this strategy:
Value  Round Up To  Result 

12.345  Tens place  20 
12.345  Ones place  13 
12.345  Tenths place  12.4 
12.345  Hundredths place  12.35 
To implement the rounding up strategy in Python, you’ll use the ceil()
function from the math
module.
The ceil()
function gets its name from the mathematical term ceiling, which describes the nearest integer that’s greater than or equal to a given number.
Every number that’s not an integer lies between two consecutive integers. For example, the number 3.7
lies in the interval between 3
and 4
. The ceiling is the greater of the two endpoints of the interval. The lesser of the two endpoints is the floor. Thus, the ceiling of 3.7
is 4
, and the floor of 3.7
is 3
.
In mathematics, a special function called the ceiling function maps every number to its ceiling. To allow the ceiling function to accept integers, the ceiling of an integer is defined to be the integer itself. So the ceiling of the number 2
is 2
.
In Python, math.ceil()
implements the ceiling function and always returns the nearest integer that’s greater than or equal to its input:
>>> import math
>>> math.ceil(3.7)
4
>>> math.ceil(2)
2
>>> math.ceil(0.5)
0
Notice that the ceiling of 0.5
is 0
, not 1
. This makes sense because 0
is the nearest integer to 0.5
that’s greater than or equal to 0.5
.
Now write a function called round_up()
that implements the rounding up strategy:
# rounding.py
import math
# ...
def round_up(n, decimals=0):
multiplier = 10**decimals
return math.ceil(n * multiplier) / multiplier
You may notice that round_up()
looks a lot like truncate()
. First, you shift the decimal point in n
the correct number of places to the right by multiplying n
by 10**decimals
. You round this new value up to the nearest integer using math.ceil()
, and then you shift the decimal point back to the left by dividing by 10**decimals
.
This pattern of shifting the decimal point, applying some rounding method to round to an integer, and then shifting the decimal point back will come up over and over again as you investigate more rounding methods. This is, after all, the mental algorithm that humans use to round numbers by hand.
Take a look at how well round_up()
works for different inputs:
>>> from rounding import round_up
>>> round_up(1.1)
2.0
>>> round_up(1.23, 1)
1.3
>>> round_up(1.543, 2)
1.55
Just like with truncate()
, you can pass a negative value to decimals
:
>>> round_up(22.45, 1)
30.0
>>> round_up(1352, 2)
1400.0
When you pass a negative number to decimals
, the number in the first argument of round_up()
is rounded to the correct number of digits to the left of the decimal point.
Take a guess at what round_up(1.5)
returns:
>>> round_up(1.5)
1.0
Is 1.0
what you expected?
If you examine the logic used in defining round_up()
—in particular, the way the math.ceil()
function works—then it makes sense that round_up(1.5)
returns 1.0
. However, some people naturally expect symmetry around zero when rounding numbers, so that if 1.5
gets rounded up to 2
, then 1.5
should get rounded up to 2
.
It’s useful to establish some terminology. For this tutorial, you’ll use the terms round up and round down according to the following diagram:
Rounding up always rounds a number to the right on the number line, and rounding down always rounds a number to the left on the number line.
Rounding Down
The counterpart to rounding up is the rounding down strategy, which always rounds a number down to a specified number of digits. Here are some examples illustrating this strategy:
Value  Rounded Down To  Result 

12.345  Tens place  10 
12.345  Ones place  12 
12.345  Tenths place  12.3 
12.345  Hundredths place  12.34 
To implement the rounding down strategy in Python, you can follow the same algorithm that you used for both trunctate()
and round_up()
. First shift the decimal point, then round to an integer, and finally shift the decimal point back.
In round_up()
, you used math.ceil()
to round up to the ceiling of the number after shifting the decimal point. For the rounding down strategy, though, you need to round to the floor of the number after shifting the decimal point.
Luckily, the math
module has a floor()
function that returns the floor of its input:
>>> import math
>>> math.floor(1.2)
1
>>> math.floor(0.5)
1
Here’s the definition of round_down()
:
# rounding.py
# ...
def round_down(n, decimals=0):
multiplier = 10**decimals
return math.floor(n * multiplier) / multiplier
That looks just like round_up()
, except you’ve replaced math.ceil()
with math.floor()
.
You can test round_down()
on a few different values:
>>> from rounding import round_down
>>> round_down(1.5)
1.0
>>> round_down(1.37, 1)
1.3
>>> round_down(0.5)
1.0
The effects of round_up()
and round_down()
can be pretty extreme. By rounding the numbers in a large dataset up or down, you could potentially remove a ton of precision and drastically alter computations made from the data.
Before you discuss any more rounding strategies, take a moment to consider how rounding can make your data biased.
Interlude: Rounding Bias
You’ve now seen three rounding methods: truncate()
, round_up()
, and round_down()
. All three of these techniques are rather crude when it comes to preserving a reasonable amount of precision for a given number.
There’s one important difference in truncate()
vs round_up()
and round_down()
that highlights an important aspect of rounding: symmetry around zero.
Recall that round_up()
isn’t symmetric around zero. In mathematical terms, a function f(x) is symmetric around zero if, for all values of x, f(x) + f(x) = 0. For example, round_up(1.5)
returns 2
, but round_up(1.5)
returns 1
. The round_down()
function isn’t symmetric around 0, either.
On the other hand, the truncate()
function is symmetric around zero. This is because, after shifting the decimal point to the right, truncate()
chops off the remaining digits. When the initial value is positive, this amounts to rounding the number down. Negative numbers are rounded up. So, truncate(1.5)
returns 1
, and truncate(1.5)
returns 1
.
The concept of symmetry introduces the notion of rounding bias, which describes how rounding affects numeric data in a dataset.
The rounding up strategy has a round toward positive infinity bias, because it’ll always round the value up in the direction of positive infinity. Likewise, the rounding down strategy has a round toward negative infinity bias.
The truncation strategy exhibits a round toward negative infinity bias on positive values and a round toward positive infinity for negative values. Rounding functions with this behavior are said to have a round toward zero bias, in general.
To see how this works in practice, consider the following list of floats:
>>> numbers = [1.25, 2.67, 0.43, 1.79, 8.19, 4.32]
You can compute the mean of the values in numbers
using the statistics.mean()
function:
>>> import statistics
>>> statistics.mean(numbers)
0.18166666666666653
Now apply each of truncate()
, round_up()
, and round_down()
in a generator expression to round each number in numbers
to one decimal place and calculate the new mean:
>>> from rounding import truncate, round_up, round_down
>>> [truncate(n, 1) for n in numbers]
[1.2, 2.6, 0.4, 1.7, 8.1, 4.3]
>>> statistics.mean(truncate(n, 1) for n in numbers)
0.1833333333333333
>>> statistics.mean(round_up(n, 1) for n in numbers)
0.23333333333333325
>>> statistics.mean(round_down(n, 1) for n in numbers)
0.13333333333333316
After every number in numbers
is rounded up, the new mean is about 0.233
, which is greater than the actual mean of about 0.182
. Rounding down shifts the mean downward to about 0.133
. The mean of the truncated values is about 0.183
and is the closest to the actual mean.
This example does not imply that you should always truncate when you need to round individual values while preserving a mean value as closely as possible. The numbers
list contains an equal number of positive and negative values. The truncate()
function would behave just like round_up()
on a list of all positive values, and just like round_down()
on a list of all negative values.
What this example does illustrate is the effect that rounding bias has on values computed from data that’s been rounded. You’ll need to keep these effects in mind when drawing conclusions from data that’s been rounded.
Typically, when rounding, you’re interested in rounding to the nearest number with some specified precision, instead of just rounding everything up or down.
For example, if someone asks you to round the numbers 1.23
and 1.28
to one decimal place, then you would probably respond quickly with 1.2
and 1.3
. The truncate()
, round_up()
, and round_down()
functions don’t do anything like this.
What about the number 1.25
? You probably immediately think to round this to 1.3
, but in reality, 1.25
is equidistant from 1.2
and 1.3
. In a sense, 1.2
and 1.3
are both the nearest numbers to 1.25
with precision of a single decimal place. The number 1.25
is called a tie with respect to 1.2
and 1.3
. In cases like this, you must assign a tiebreaker.
The way that most people learn to break ties is by rounding to the greater of the two possible numbers.
Better Rounding Strategies in Python
In this section, you’ll continue your exploration of rounding strategies. You’ve seen some weaknesses in the methods that you’ve worked with so far. The upcoming techniques are better at dealing with biases, but they’re also a bit more complex to consider and to implement.
Rounding Half Up
The rounding half up strategy rounds every number to the nearest number with the specified precision and breaks ties by rounding up. Here are some examples:
Value  Round Half Up To  Result 

13.825  Tens place  10 
13.825  Ones place  14 
13.825  Tenths place  13.8 
13.825  Hundredths place  13.83 
To implement the rounding half up strategy in Python, you start as usual by shifting the decimal point to the right by the desired number of places. At this point, though, you need a way to determine if the digit just after the shifted decimal point is less than or greater than or equal to 5
.
One way to do this is to add 0.5
to the shifted value and then round down with math.floor()
. This works because:

If the digit in the first decimal place of the shifted value is less than
5
, then adding0.5
won’t change the integer part of the shifted value, so the floor is equal to the integer part. 
If the first digit after the decimal place is greater than or equal to
5
, then adding0.5
will increase the integer part of the shifted value by1
, so the floor is equal to this larger integer.
Here’s what this looks like in Python:
# rounding.py
# ...
def round_half_up(n, decimals=0):
multiplier = 10**decimals
return math.floor(n * multiplier + 0.5) / multiplier
Notice that round_half_up()
looks a lot like round_down()
. This might be somewhat counterintuitive, but internally round_half_up()
only rounds down. The trick is to add the 0.5
after shifting the decimal point so that the result of rounding down matches the expected value.
Now you can test round_half_up()
on a few values to see that it works:
>>> from rounding import round_half_up
>>> round_half_up(1.23, 1)
1.2
>>> round_half_up(1.28, 1)
1.3
>>> round_half_up(1.25, 1)
1.3
Since round_half_up()
always breaks ties by rounding to the greater of the two possible values, negative values like 1.5
round to 1
, not to 2
:
>>> round_half_up(1.5)
1.0
>>> round_half_up(1.25, 1)
1.2
Great! You can now finally get that result that the builtin round()
function denied you:
>>> round_half_up(2.5)
3.0
Before you get too excited though, check out what happens when you try and round 1.225
to 2
decimal places:
>>> round_half_up(1.225, 2)
1.23
Wait. You just noted how ties get rounded to the greater of the two possible values. 1.225
is smack in the middle of 1.22
and 1.23
. Since 1.22
is the greater of these two, round_half_up(1.225, 2)
should return 1.22
. But instead, you got 1.23
.
Is there a bug in the round_half_up()
function?
When round_half_up()
rounds 1.225
to two decimal places, the first thing it does is multiply 1.225
by 100
. Make sure this works as expected:
>>> 1.225 * 100
122.50000000000001
Well … that’s wrong! But it does explain why round_half_up(1.225, 2)
returns 1.23. Now continue the round_half_up()
algorithm stepbystep, utilizing _
in the REPL to recall the last value output at each step:
>>> _ + 0.5
122.00000000000001
>>> math.floor(_)
123
>>> _ / 100
1.23
Even though 122.00000000000001
is really close to 122
, the nearest integer that’s less than or equal to it is 123
. When you shift the decimal point back to the left, the final value is 1.23
.
Well, now you know how round_half_up(1.225, 2)
returns 1.23
even though there’s no logical error, but why does Python say that 1.225 * 100
is 122.50000000000001
? Is there a bug in Python?
Note*: For a hint about what’s happening, type the following in a Python interpreter session:
>>> 0.1 + 0.1 + 0.1
0.30000000000000004
Seeing this for the first time can be pretty shocking, but this is a classic example of the floatingpoint representation error. It has nothing to do with Python. The error has to do with how machines store floatingpoint numbers in memory.
Most modern computers store floatingpoint numbers as binary decimals with 53bit precision. Only numbers that have finite binary decimal representations that can be expressed in 53 bits are stored as an exact value. Not every number has a finite binary decimal representation.
You can learn more about how Python treats floating point numbers in Numbers in Python.
For a more indepth treatise on floatingpoint arithmetic, check out David Goldberg’s article What Every Computer Scientist Should Know About FloatingPoint Arithmetic, originally published in the journal ACM Computing Surveys, Vol. 23, No. 1, March 1991.
The fact that Python says that 1.225 * 100
is 122.50000000000001
is an artifact of the floatingpoint representation error. You might be asking yourself, Okay, but is there a way to fix this? A better question to ask yourself is Do I need to fix this?
Floatingpoint numbers don’t have exact precision, and therefore you should not use them in situations where precision is paramount. For applications where the exact precision is necessary, you can use the Decimal
class from Python’s decimal
module. You’ll learn more about the Decimal
class below.
If you’ve determined that Python’s standard float
class is sufficient for your application, then some occasional errors in round_half_up()
due to the floatingpoint representation error shouldn’t be a concern.
Now that you’ve gotten a taste of how machines round numbers in memory, you can continue your journey into rounding strategies by looking at another way to break a tie.
Rounding Half Down
The rounding half down strategy rounds to the nearest number with the desired precision, just like the rounding half up method, except that it breaks ties by rounding to the lesser of the two numbers. Here are some examples:
Value  Round Half Down To  Result 

13.825  Tens place  10 
13.825  Ones place  14 
13.825  Tenths place  13.8 
13.825  Hundredths place  13.82 
You can implement the rounding half down strategy in Python by replacing math.floor()
in the round_half_up()
function with math.ceil()
and subtracting 0.5
instead of adding:
# rounding.py
# ...
def round_half_down(n, decimals=0):
multiplier = 10**decimals
return math.ceil(n * multiplier  0.5) / multiplier
Now check round_half_down()
against a few test cases:
>>> from rounding import round_half_down
>>> round_half_down(1.5)
1.0
>>> round_half_down(1.5)
2.0
>>> round_half_down(2.25, 1)
2.2
Both round_half_up()
and round_half_down()
have no bias in general. However, rounding data with lots of ties does introduce a bias. For an extreme example, consider the following list of numbers:
>>> numbers = [2.15, 1.45, 4.35, 12.75]
Compute the mean of these numbers:
>>> import statistics
>>> statistics.mean(numbers)
1.925
Next, compute the mean on the data after rounding to one decimal place with round_half_up()
and round_half_down()
:
>>> statistics.mean(round_half_up(n, 1) for n in numbers)
1.975
>>> statistics.mean(round_half_down(n, 1) for n in numbers)
1.8749999999999996
Every number in numbers
is a tie with respect to rounding to one decimal place. The round_half_up()
function introduces a round toward positive infinity bias, and round_half_down()
introduces a round toward negative infinity bias.
The remaining rounding strategies all attempt to mitigate these biases in different ways.
Rounding Half Away From Zero
If you examine round_half_up()
and round_half_down()
closely, then you’ll notice that neither of these functions is symmetric around zero:
>>> from rounding import round_half_down, round_half_up
>>> round_half_up(1.5)
2.0
>>> round_half_up(1.5)
1.0
>>> round_half_down(1.5)
1.0
>>> round_half_down(1.5)
2.0
One way to introduce symmetry is to always round a tie away from zero. The following table illustrates how this works:
Value  Round Half Away From Zero To  Result 

15.25  Tens place  20 
15.25  Ones place  15 
15.25  Tenths place  15.3 
15.25  Tens place  20 
15.25  Ones place  15 
15.25  Tenths place  15.3 
To implement the rounding half away from zero strategy on a number n
, you start as usual by shifting the decimal point to the right a given number of places. Then you look at the digit d
immediately to the right of the decimal place in this new number. At this point, there are four cases to consider:
 If
n
is positive andd >= 5
, round up.  If
n
is positive andd < 5
, round down.  If
n
is negative andd >= 5
, round down.  If
n
is negative andd < 5
, round up.
After rounding according to one of the above four rules, you then shift the decimal place back to the left.
Given a number n
and a value for decimals
, you could implement this in Python by using round_half_up()
and round_half_down()
:
if n >= 0:
rounded = round_half_up(n, decimals)
else:
rounded = round_half_down(n, decimals)
That looks pretty good, but there’s actually a simpler way!
If you first take the absolute value of n
using Python’s builtin abs()
function, then you can just use round_half_up()
to round the number. Then all you need to do is give the rounded number the same sign as n
. One way to do this is using the math.copysign()
function.
math.copysign()
takes two numbers a
and b
and returns a
with the sign of b
:
>>> import math
>>> math.copysign(1, 2)
1.0
Notice that math.copysign()
returns a float
, even though both of its arguments were integers.
Using abs()
, round_half_up()
, and math.copysign()
, you can implement the rounding half away from zero strategy in just two lines of Python:
# rounding.py
# ...
def round_half_away_from_zero(n, decimals=0):
rounded_abs = round_half_up(abs(n), decimals)
return math.copysign(rounded_abs, n)
In round_half_away_from_zero()
, you round the absolute value of n
to decimals
decimal places using round_half_up()
, and you assign this result to the variable rounded_abs
. Then you apply the original sign of n
to rounded_abs
using math.copysign()
, and your function returns this final value with the correct sign.
Checking round_half_away_from_zero()
on a few different values shows that the function behaves as expected:
>>> from rounding import round_half_away_from_zero
>>> round_half_away_from_zero(1.5)
2.0
>>> round_half_away_from_zero(1.5)
2.0
>>> round_half_away_from_zero(12.75, 1)
12.8
The round_half_away_from_zero()
function rounds numbers the way most people tend to round numbers in everyday life. Besides being the most familiar rounding function that you’ve seen so far, round_half_away_from_zero()
also eliminates rounding bias well in datasets that have an equal number of positive and negative ties.
Check out how well round_half_away_from_zero()
mitigates rounding bias in the example from the previous section:
>>> numbers = [2.15, 1.45, 4.35, 12.75]
>>> import statistics
>>> statistics.mean(numbers)
1.925
>>> statistics.mean(round_half_away_from_zero(n, 1) for n in numbers)
1.925
The mean value of the numbers in numbers
is preserved exactly when you round each number in numbers
to one decimal place with round_half_away_from_zero()
!
However, round_half_away_from_zero()
will exhibit a rounding bias when you round every number in datasets with only positive ties, only negative ties, or more ties of one sign than the other. It only mitigates bias well if there’s a similar number of positive and negative ties in the dataset.
How do you handle situations where you have a drastically different number of positive and negative ties? The answer to this question brings you full circle to that deceptive function from the beginning of this tutorial: Python’s builtin round()
function.
Rounding Half to Even
One way to mitigate rounding bias when rounding values in a dataset is to round ties to the nearest even number at the desired precision. Here are some examples of how to do that:
Value  Round Half To Even To  Result 

15.255  Tens place  20 
15.255  Ones place  15 
15.255  Tenths place  15.3 
15.255  Hundredths place  15.26 
The rounding half to even strategy is the strategy that Python’s builtin round()
function uses, and it’s the default rounding rule in the IEEE754 standard. This strategy works under the assumption that there’s an equal probability of rounding a tie in a dataset down or up. In practice, this is usually the case.
Now you know why round(2.5)
returns 2
. It’s not a mistake. It is a conscious design decision based on solid recommendations.
To prove to yourself that round()
really does round to even, try it on a few different values:
>>> round(4.5)
4
>>> round(3.5)
4
>>> round(1.75, 1)
1.8
>>> round(1.65, 1)
1.6
The round()
function is nearly free from bias, but it isn’t perfect. For example, rounding bias can still creep in if the majority of the ties in your dataset round up to even instead of rounding down. Strategies that mitigate bias even better than rounding half to even do exist, but they’re somewhat obscure and only necessary in extreme circumstances.
Finally, round()
suffers from the same hiccups that you saw in round_half_up()
, thanks to floatingpoint representation error:
>>> # Expected value: 2.68
>>> round(2.675, 2)
2.67
You shouldn’t be concerned with these occasional errors if floatingpoint precision is sufficient for your application.
When precision is paramount, you should use Python’s Decimal
class.
The Decimal
Class
Python’s decimal
module is one of those batteriesincluded features of the language that you might not be aware of if you’re new to Python. You can find the guiding principle of the decimal
module in the documentation:
Decimal “is based on a floatingpoint model which was designed with people in mind, and necessarily has a paramount guiding principle – computers must provide an arithmetic that works in the same way as the arithmetic that people learn at school.” – excerpt from the decimal arithmetic specification. (Source)
The benefits of the decimal
module include:
 Exact decimal representation:
0.1
is actually0.1
, and0.1 + 0.1 + 0.1  0.3
returns0
, as you’d expect.  Preservation of significant digits: When you add
1.20
and2.50
, the result is3.70
, with the trailing zero maintained to indicate significance.  Useralterable precision: The default precision of the
decimal
module is twentyeight digits, but you can alter this value to match the problem at hand.
But how does rounding work in the decimal
module? Start by typing the following into a Python REPL:
>>> import decimal
>>> decimal.getcontext()
Context(
prec=28,
rounding=ROUND_HALF_EVEN,
Emin=999999,
Emax=999999,
capitals=1,
clamp=0,
flags=[],
traps=[InvalidOperation, DivisionByZero, Overflow]
)
decimal.getcontext()
returns a Context
object representing the default context of the decimal
module. The context includes the default precision and the default rounding strategy, among other things.
As you can see in the example above, the default rounding strategy for the decimal
module is ROUND_HALF_EVEN
. This aligns with the builtin round()
function and should be the preferred rounding strategy for most purposes.
Now declare a number using the decimal
module’s Decimal
class. To do so, create a new Decimal
instance by passing a string containing the desired value:
>>> from decimal import Decimal
>>> Decimal("0.1")
Decimal('0.1')
You’ve created a Decimal
object. You’ll now see how to make calculations with it.
Note: It’s possible to create a Decimal
instance from a floatingpoint number, but doing so introduces the floatingpoint representation error right off the bat. For example, check out what happens when you create a Decimal
instance from the floatingpoint number 0.1
:
>>> Decimal(0.1)
Decimal('0.1000000000000000055511151231257827021181583404541015625')
In order to maintain exact precision, you must create Decimal
instances from strings containing the decimal numbers you need.
Just for fun, test the assertion that Decimal
maintains exact decimal representation:
>>> Decimal("0.1") + Decimal("0.1") + Decimal("0.1")
Decimal('0.3')
Ahhh. That’s satisfying, isn’t it?
You can round a Decimal
with the .quantize()
method or with the round()
builtin function:
>>> Decimal("1.65").quantize(Decimal("1.0"))
Decimal('1.6')
>>> round(Decimal("1.65"), 1)
Decimal('1.6')
The .quantize()
method probably looks a little funky, so you’ll break it down. The Decimal("1.0")
argument in .quantize()
determines the number of decimal places to round the number. Since 1.0
has one decimal place, the number 1.65
rounds to a single decimal place. The default rounding strategy is rounding half to even, so the result is 1.6
.
Recall that the round()
function, which also uses the rounding half to even strategy, failed to round 2.675
to two decimal places correctly. Instead of giving you 2.68
, round(2.675, 2)
returns 2.67
. Thanks to the decimal
module’s exact decimal representation, you won’t have this issue with the Decimal
class:
>>> round(Decimal("2.675"), 2)
Decimal('2.68')
Another benefit of the decimal
module is that it automatically takes care of rounding after performing arithmetic, and it preserves significant digits. To see this in action, change the default precision from twentyeight digits to two, and then add the numbers 1.23
and 2.32
:
>>> decimal.getcontext().prec = 2
>>> Decimal("1.23") + Decimal("2.32")
Decimal('3.6')
To change the precision, you call decimal.getcontext()
and set the .prec
attribute. If setting the attribute on a function call looks odd to you, you can do this because .getcontext()
returns a special Context
object that represents the current internal context containing the default parameters that the decimal
module uses.
The exact value of 1.23
plus 2.32
is 3.55
. Since the precision is now two digits, and the rounding strategy is set to the default of rounding half to even, the value 3.55
is automatically rounded to 3.6
.
To change the default rounding strategy, you can set the decimal.getcontext().rounding
property to any one of several flags. The following table summarizes these flags and which rounding strategy they implement:
Flag  Rounding Strategy 

decimal.ROUND_DOWN 
Truncation 
decimal.ROUND_CEILING 
Rounding up 
decimal.ROUND_FLOOR 
Rounding down 
decimal.ROUND_UP 
Rounding away from zero 
decimal.ROUND_HALF_UP 
Rounding half away from zero 
decimal.ROUND_HALF_DOWN 
Rounding half toward zero 
decimal.ROUND_HALF_EVEN 
Rounding half to even 
decimal.ROUND_05UP 
Rounding up and rounding toward zero 
The first point to notice is that the decimal
module’s naming scheme differs from what you were using earlier in the tutorial. For example, decimal.ROUND_UP
implements the rounding away from zero strategy, which actually rounds negative numbers down.
Secondly, some of the rounding strategies mentioned in the table may look unfamiliar since you haven’t explored them here. You’ve already seen how decimal.ROUND_HALF_EVEN
works, so you’ll take a look at each of the others in action.
The decimal.ROUND_CEILING
strategy works just like the round_up()
function that you defined earlier:
>>> decimal.getcontext().rounding = decimal.ROUND_CEILING
>>> round(Decimal("1.32"), 1)
Decimal('1.4')
>>> round(Decimal("1.32"), 1)
Decimal('1.3')
Notice that the results of decimal.ROUND_CEILING
aren’t symmetric around zero.
The decimal.ROUND_FLOOR
strategy works just like your round_down()
function:
>>> decimal.getcontext().rounding = decimal.ROUND_FLOOR
>>> round(Decimal("1.32"), 1)
Decimal('1.3')
>>> round(Decimal("1.32"), 1)
Decimal('1.4')
Like decimal.ROUND_CEILING
, the decimal.ROUND_FLOOR
strategy isn’t symmetric around zero.
The decimal.ROUND_DOWN
and decimal.ROUND_UP
strategies have somewhat deceptive names. Both ROUND_DOWN
and ROUND_UP
are symmetric around zero:
>>> decimal.getcontext().rounding = decimal.ROUND_DOWN
>>> round(Decimal("1.32"), 1)
Decimal('1.3')
>>> round(Decimal("1.32"), 1)
Decimal('1.3')
>>> decimal.getcontext().rounding = decimal.ROUND_UP
>>> round(Decimal("1.32"), 1)
Decimal('1.4')
>>> round(Decimal("1.32"), 1)
Decimal('1.4')
The decimal.ROUND_DOWN
strategy rounds numbers toward zero, just like the truncate()
function. On the other hand, decimal.ROUND_UP
rounds everything away from zero. This is a clear break from the terminology that you were using earlier in the article, so keep that in mind when you’re working with the decimal
module.
There are three strategies in the decimal
module that allow for more nuanced rounding. The decimal.ROUND_HALF_UP
method rounds everything to the nearest number and breaks ties by rounding away from zero:
>>> decimal.getcontext().rounding = decimal.ROUND_HALF_UP
>>> round(Decimal("1.35"), 1)
Decimal('1.4')
>>> round(Decimal("1.35"), 1)
Decimal('1.4')
Notice that decimal.ROUND_HALF_UP
works just like your round_half_away_from_zero()
and not like round_half_up()
.
There’s also a decimal.ROUND_HALF_DOWN
strategy that breaks ties by rounding toward zero:
>>> decimal.getcontext().rounding = decimal.ROUND_HALF_DOWN
>>> round(Decimal("1.35"), 1)
Decimal('1.3')
>>> round(Decimal("1.35"), 1)
Decimal('1.3')
The final rounding strategy available in the decimal
module is very different from anything that you’ve seen so far:
>>> decimal.getcontext().rounding = decimal.ROUND_05UP
>>> round(Decimal("1.38"), 1)
Decimal('1.3')
>>> round(Decimal("1.35"), 1)
Decimal('1.3')
>>> round(Decimal("1.35"), 1)
Decimal('1.3')
In the above examples, it looks as if decimal.ROUND_05UP
rounds everything toward zero. In fact, this is exactly how decimal.ROUND_05UP
works, unless the result of rounding ends in a 0
or 5
. In that case, the number gets rounded away from zero:
>>> round(Decimal("1.49"), 1)
Decimal('1.4')
>>> round(Decimal("1.51"), 1)
Decimal('1.6')
In the first example, you first round the number 1.49
toward zero in the second decimal place, producing 1.4
. Since 1.4
doesn’t end in a 0
or a 5
, you leave it as is. On the other hand, you round 1.51
toward zero in the second decimal place, resulting in the number 1.5
. This ends in a 5
, so you then round the first decimal place away from zero to 1.6
.
In this section, you’ve only focused on the rounding aspects of the decimal
module. There are numerous other features that make decimal
an excellent choice for applications where the standard floatingpoint precision is inadequate, such as banking and some problems in scientific computing.
For more information on Decimal
, check out the Quickstart Tutorial in the Python docs.
Next, turn your attention to two staples of Python’s scientific computing and data science stacks: NumPy and pandas.
Rounding NumPy Arrays
In the domains of data science and scientific computing, you often store your data as a NumPy array
. One of NumPy’s most powerful features is its use of vectorization and broadcasting to apply operations to an entire array at once instead of one element at a time.
You’ll generate some data by creating a 3×4 NumPy array of pseudorandom numbers:
>>> import numpy as np
>>> rng = np.random.default_rng(seed=444)
>>> data = rng.normal(size=(3, 4))
>>> data
array([[0.69011449, 2.10455459, 0.78789037, 0.93417409],
[ 0.58204206, 0.7022188 , 0.23768089, 0.1183704 ],
[0.41049553, 0.55583871, 0.00684936, 0.50000095]])
First, you create a random number generator and add a seed so that you can easily reproduce the output. Then you create a 3×4 NumPy array of floatingpoint numbers with .normal()
, which produces normally distributed random numbers.
Note: You’ll need to run python m pip install numpy
before typing the above code into your REPL if you don’t already have NumPy in your environment. If you installed Python with Anaconda, then you’re already set!
If you haven’t used NumPy before, you can get a quick introduction in NumPy Tutorial: Your First Steps Into Data Science in Python and dive into how to write fast NumPy code in Look Ma, No for
Loops: Array Programming With NumPy here at Real Python.
For more information on NumPy’s random
module, check out Using the NumPy Random Number Generator and Generating Random Data in Python (Guide).
To round all of the values in the data
array, you can pass data
as the argument to the np.round()
function. You set the desired number of decimal places with the decimals
keyword argument. The NumPy function uses the round half to even strategy, just like Python’s builtin round()
function.
For example, the following code rounds all of the values in data
to three decimal places:
>>> np.round(data, decimals=3)
array([[0.69 , 2.105, 0.788, 0.934],
[ 0.582, 0.702, 0.238, 0.118],
[0.41 , 0.556, 0.007, 0.5 ]])
Alternatively, you can also use the .round()
method on the array:
>>> data.round(decimals=3)
array([[0.69 , 2.105, 0.788, 0.934],
[ 0.582, 0.702, 0.238, 0.118],
[0.41 , 0.556, 0.007, 0.5 ]])
Typically, the .round()
method call will be slightly faster than calling the np.round()
function, as the latter delegates to the method under the hood.
If you need to round the data in your array to integers, then NumPy offers several options:
The np.ceil()
function rounds every value in the array to the nearest integer greater than or equal to the original value:
>>> np.ceil(data)
array([[0., 2., 0., 1.],
[ 1., 1., 0., 1.],
[0., 0., 1., 0.]])
Hey, that’s a new number! Negative zero!
Actually, the IEEE754 standard requires the implementation of both a positive and negative zero. What possible use is there for something like this? Wikipedia knows the answer:
Informally, one may use the notation “
−0
” for a negative value that was rounded to zero. This notation may be useful when a negative sign is significant; for example, when tabulating Celsius temperatures, where a negative sign means below freezing. (Source)
To round every value down to the nearest integer, use np.floor()
:
>>> np.floor(data)
array([[1., 3., 1., 0.],
[ 0., 0., 1., 0.],
[1., 1., 0., 1.]])
You can also truncate each value to its integer component with np.trunc()
:
>>> np.trunc(data)
array([[0., 2., 0., 0.],
[ 0., 0., 0., 0.],
[0., 0., 0., 0.]])
Finally, to round to the nearest integer using the rounding half to even strategy, use np.rint()
:
>>> np.rint(data)
array([[1., 2., 1., 1.],
[ 1., 1., 0., 0.],
[0., 1., 0., 1.]])
You might have noticed that a lot of the rounding strategies that you studied earlier are missing here. For the vast majority of situations, the .round()
method is all you need. If you need to implement another strategy, such as round_half_up()
, you can do so with a small modification to your earlier code:
# rounding.py
import numpy as np
# ...
def round_half_up(n, decimals=0):
multiplier = 10**decimals
return np.floor(n * multiplier + 0.5) / multiplier
Here, you’ve replaced math.floor()
with np.floor()
. You can do similar modifications to your other rounding functions.
Thanks to NumPy’s vectorized operations, the updated function works just as you expect:
>>> from rounding import round_half_up
>>> round_half_up(data, decimals=2)
array([[0.69, 2.1 , 0.79, 0.93],
[ 0.58, 0.7 , 0.24, 0.12],
[0.41, 0.56, 0.01, 0.5 ]])
Now that you’re a NumPy rounding master, take a look at Python’s other data science heavyweight: the pandas library.
Rounding pandas Series
and DataFrame
The pandas library has become a staple for data scientists and data analysts who work in Python. In the words of Real Python’s own Joe Wyndham:
pandas is a game changer for data science and analytics, particularly if you came to Python because you were searching for something more powerful than Excel and VBA. (Source)
Note: Before you continue, you’ll need to run python m pip install pandas
if you don’t already have it in your environment. As was the case for NumPy, if you installed Python with Anaconda, you should be ready to go!
The two main pandas data structures are the DataFrame
, which in very loose terms works sort of like an Excel spreadsheet, and the Series
, which you can think of as a column in a spreadsheet. You can round both Series
and DataFrame
objects efficiently using the Series.round()
and DataFrame.round()
methods:
>>> import numpy as np
>>> import pandas as pd
>>> rng = np.random.default_rng(seed=444)
>>> series = pd.Series(rng.normal(size=4))
>>> series
0 0.690114
1 2.104555
2 0.787890
3 0.934174
dtype: float64
>>> series.round(2)
0 0.69
1 2.10
2 0.79
3 0.93
dtype: float64
>>> df = pd.DataFrame(rng.normal(size=(3, 3)), columns=["A", "B", "C"])
>>> df
A B C
0 0.582042 0.702219 0.237681
1 0.118370 0.410496 0.555839
2 0.006849 0.500001 0.141762
>>> df.round(3)
A B C
0 0.582 0.702 0.238
1 0.118 0.410 0.556
2 0.007 0.500 0.142
The DataFrame.round()
method can also accept a dictionary or a Series
to specify a different precision for each column. In the following example, you round the first column of df
to one decimal place, the second to two, and the third to three decimal places:
>>> df.round({"A": 1, "B": 2, "C": 3})
A B C
0 0.6 0.70 0.238
1 0.1 0.41 0.556
2 0.0 0.50 0.142
If you need more rounding flexibility, you can apply NumPy’s floor()
, ceil()
, trunc()
, and rint()
functions to pandas Series
and DataFrame
objects:
>>> np.floor(df)
A B C
0 0.0 0.0 1.0
1 0.0 1.0 1.0
2 0.0 1.0 1.0
>>> np.ceil(df)
A B C
0 1.0 1.0 0.0
1 1.0 0.0 0.0
2 1.0 0.0 0.0
>>> np.trunc(df)
A B C
0 0.0 0.0 0.0
1 0.0 0.0 0.0
2 0.0 0.0 0.0
>>> np.rint(df)
A B C
0 1.0 1.0 0.0
1 0.0 0.0 1.0
2 0.0 1.0 0.0
The modified round_half_up()
function from the previous section will also work here:
>>> from rounding import round_half_up
>>> round_half_up(df, decimals=2)
A B C
0 0.58 0.70 0.24
1 0.12 0.41 0.56
2 0.01 0.50 0.14
Congratulations, you’re well on your way to rounding mastery! You now know that there are more ways to round a number than there are taco combinations. (Well … maybe not!) You can implement numerous rounding strategies in pure Python, and you’ve sharpened your skills on rounding NumPy arrays and pandas Series
and DataFrame
objects.
There’s just one more step: knowing when to apply the right strategy.
Applications and Best Practices
The last stretch on your road to rounding virtuosity is understanding when to apply your newfound knowledge. In this section, you’ll learn some best practices to make sure you round your numbers the right way.
Store More and Round Late
When you deal with large sets of data, storage can be an issue. In most relational databases, each column in a table is designed to store a specific data type, and numeric data types are often assigned precision to help conserve memory.
For example, a temperature sensor may report the temperature in a longrunning industrial oven every ten seconds, accurate to eight decimal places. You could use the readings from this to detect abnormal fluctuations in temperature that could indicate the failure of a heating element or some other component. So, there might be a Python script running that compares each incoming reading to the last to check for large fluctuations.
The readings from this sensor are also stored in a SQL database so that the daily average temperature inside the oven can be computed each day at midnight. The manufacturer of the heating element inside the oven recommends replacing the component whenever the daily average temperature drops .05
degrees below normal.
For this calculation, you only need three decimal places of precision. But you know from the incident at the Vancouver Stock Exchange that removing too much precision can drastically affect your calculation.
If you have the space available, then you should store the data at full precision. If storage is an issue, then a good rule of thumb is to store at least two or three more decimal places of precision than you need for your calculation.
Finally, when you compute the daily average temperature, you should calculate it to the full precision available and round the final answer.
Obey Local Currency Regulations
When you order a cup of coffee for $2.40 at the coffee shop, the merchant typically adds the required tax. The amount of that tax depends a lot on where you are geographically, but for the sake of argument, say it’s 6%. The tax to be added comes out to $0.144. Should you round this up to $0.15 or down to $0.14? The answer probably depends on the regulations set forth by the local government!
Situations like this can also arise when you’re converting one currency to another. In 1999, the European Commission on Economical and Financial Affairs codified the use of the rounding half away from zero strategy when converting currencies to the Euro, but other currencies may have adopted different regulations.
Another scenario, Swedish rounding, occurs when the minimum unit of currency at the accounting level in a country is smaller than the lowest unit of physical currency. For example, if a cup of coffee costs $2.54 after tax, but there are no onecent coins in circulation, what do you do? The buyer won’t have the exact amount, and the merchant can’t make exact change.
A country’s government typically determines how to handle situations like this. You can find a list of rounding methods used by various countries on Wikipedia.
If you’re designing software for calculating currencies, then you should always check the local laws and regulations in your users’ locations.
When in Doubt, Round Ties to Even
When you’re rounding numbers in large datasets that are used in complex computations, the primary concern is limiting the growth of the error due to rounding.
Of all the methods that you’ve explored in this article, the rounding half to even strategy minimizes rounding bias the best. Fortunately, Python, NumPy, and pandas all default to this strategy, so by using the builtin rounding functions, you’re already well protected!
Conclusion
Whew! What a journey this has been!
In this article, you’ve learned that:
 There are various rounding strategies, which you now know how to implement in pure Python.
 Every rounding strategy inherently introduces a rounding bias, and the rounding half to even strategy mitigates this bias well, most of the time.
 The way in which computers store floatingpoint numbers in memory naturally introduces a subtle rounding error, but you learned how to work around this with the
decimal
module in Python’s standard library.  You can round NumPy arrays and pandas
Series
andDataFrame
objects.  There are best practices for rounding with realworld data.
Take the Quiz: Test your knowledge with our interactive “Rounding Numbers in Python” quiz. Upon completion you will receive a score so you can track your learning progress over time:
Free Bonus: Click here to download sample code to ensure that your numbers are always well rounded!
If you’re interested in learning more and digging into the nittygritty details of everything that you’ve covered, then the links below should keep you busy for quite a while.
At the very least, if you’ve enjoyed this tutorial and learned something new from it, pass it on to a friend or team member! Be sure to share your thoughts in the comments. Your fellow programmers would love to hear some of your own roundingrelated battle stories!
Happy Pythoning!
Additional Resources
Rounding strategies and bias:
 Rounding, Wikipedia
 Rounding Numbers without Adding a Bias, from ZipCPU
Floatingpoint and decimal specifications:
Interesting Reads:
 What Every Computer Scientist Should Know About FloatingPoint Arithmetic, David Goldberg, ACM Computing Surveys, March 1991
 Floating Point Arithmetic: Issues and Limitations, from python.org
 Why Python’s Integer Division Floors, by Guido van Rossum